Clean used panels
Remove dust, dirt and other deposits thoroughly. New panels do not require prior cleaning. Ensure panels are cool, dry and free from standing water.
03 / APPLICATION
Clean. Spray.
Let sunlight do the rest.
A simple application process with a precise material dose and a suitable weather window.
APPLICATION VIDEO
See how simple application can be.
Watch the application video alongside the step-by-step instructions below.
The same original video is shown in every language version.
Watch on YouTubeSpray evenly
Apply a maximum of 20 ml per m². Do not spread, wipe or polish. Nothing further is required after spraying.
Dry in sunlight
Sunlight dries the coating within approximately 24 hours. Apply only between +5°C and +25°C.
Activate in sunlight
The coating activates within approximately two weeks. Thereafter, sunlight and rainfall support the self-cleaning effect.
Choose your application window.Apply in the morning or late afternoon. Avoid application if rain is expected within 6 hours.
LONG-LASTING SURFACE CARE
One application.
Up to 5 years of action.
CERACOAT is designed to remain active for up to 5 years. Reduced dirt build-up can significantly extend the intervals between manual cleaning visits.
Service life and cleaning intervals depend on application quality, rainfall, panel tilt and local contamination. Up to 5 years of coating activity does not mean a fixed 5-year cleaning interval.
MATERIAL PLANNING
Calculate your
coating quantity.
Use the actual glass area of the modules, rather than the land or roof area. This estimate uses the maximum application rate of 20 ml/m².
Available packaging: 5 L, 20 L and 50 L.
20litres of coating at the maximum rate
1 litre covers 50 m² at 20 ml/m². Packaging, application losses and project logistics should be confirmed separately.
Keep the instructions on hand.
Download the application guide for your team. For large installations, discuss application equipment, access and a suitable trial area with CERACOAT.
Download application guideLET’S TALK SOLAR
Plan the application with us.
Tell us about your installation, location and project goals.